Kicker KA47KEY200.4 Key Smart 4 Channel Car Amplifier

Kicker KA47KEY200.4

Experience the power of sound with the KEY 200W 4 Channel Smart Amplifier. This compact powerhouse optimizes audio specifically for your vehicles interior, delivering crystal clear sound with 200 watts of power. With a simple press of a button, it auto-configures settings for the ultimate listening experience. Its compatibility with start-stop systems and FIT2™ technology makes it a perfect fit for almost any vehicle. Enjoy uninterrupted music and impress your passengers with its impressive features.

Features automatic signal processing that optimises the sound specifically for your vehicle’s interior. What would take hours for a professional to achieve happens in a matter of minutes. All automatically. All with the press of a single button.

Once the amplifier has been installed and wired up, you connect the included calibration microphone to the amp and put it on the drivers headrest, play the test tone (downloaded from Kicker), press the activation button, and let the KEY Auto Setup software automatically configure the crossovers, 40-band EQ, and time-align the sound for the front seat driver. You can then use the button on the microphone to toggle between the before- and after-processing sound, impressing your friends and family.

For the KEY200.4 auto set-up, you will need to download the free test tone available HERE

Features

• 200 Watts of Power (50×4)
• Auto EQ Microphone with Selector Switch Included
• Compatible with Start/Stop Vehicle Technology
• FIT2™ Technology Included
• Turn On Via Remote 12v Signal or DC Offset
• Auto 40-Band Equalizer
• Bi-Amp Capability (Defeatable)
• Auto Compressor (Defeatable)
• Kicker EQ Pre-set (Defeatable)
• Auto Time Alignment (Defeatable)
• Auto Level Adjustment (Bi-Amp Mode Only)
• Auto Speaker Size Detection
• 24dB Crossovers
• 60/80/120Hz High Pass Filter (Defeatable)
• Not bridgeable

Specifications

• Power (watts/ch), 4 Ohm stereo: 50W x 4
• Microphone/Kicker EQ button: Included
• Dimensions in CM (H x W x L): 4.3 x 7 x 18.7
• Frequency Response (Hz): 20-20k, +0/-1dB
• Input Sensitivity: High level 250mV-10V
• Signal-to-Noise Ratio: >90dB, a-weighted, re: rated power
• Active Crossover: 24dB/octave, selective high pass or all pass @60, 80, or 120Hz
• RMS Power @ 14.4V
  • 50W x 4 @ 4Ω
• Output Channels 4
• Voltage (V) 12
• Class D
• Features
  • Built in Self Calibrating DSP
  • FIT2 Technology
• Fuse Rating (A) 20A
• Cable Gauge (AWG) 14
• Amp Turn-On
  • DC Offset
  • 12V
• Frequency Response (Hz) 20-20k
• Signal-to-Noise Ratio (dB) 90
• Filter High-Pass
• Controller N/A
• Input Channels
  • 2
  • 4
  • Mic
• Input Type
  • High Level
  • Low Level
• Input Sensitivity Low Level N/A
• Input Sensitivity High Level 250mV-10V
• Height (cm) 4.3
• Width (cm) 18.7
• Depth (cm) 7
• Colour Black

Power House

In addition to an unbelievable sound quality, the KEY200.4 delivers 200 watts of pumpin’ power to your speakers. At KICKER, we know power and clarity always go hand-in-hand.

Hidden Treasure

Measuring less than eight inches long and only two inches high, the KEY200.4 fits nearly anywhere. Mount it behind your radio, under the seat, or in your boot with ease.

Start. Don’t Stop.

The KEY200.4 is one of the first amps fully compatible with newer vehicles using start-stop systems. The amplifier also features FIT2™ (Fail-Safe Integration Technology), providing compatibility with nearly every stock and aftermarket radio on the road today.

Keep the Beat

If the temperature reaches the threshold, the KEY200.4’s dynamic power-management algorithms kick into gear! Instead of hearing the amplifier’s volume “pumping” or blowing a fuse – KEY technology engages a nearly inaudible limiter/compressor, applied only to the peaks of the music for as little as milliseconds at a time. The amplifier quickly cools, which deactivates the compressor. Music returns to its full dynamic range without a moment’s interruption!

What’s in the Box

• 4 channel power amplifier
• Microphone
• Microphone cable with switch
• Fuse holder
• Manual and installation hardware